WELLDONE > Solution > Dust Treatment of Flaming and Plasma Cutting

Dust Treatment of Flaming and Plasma Cutting

A side suction system is for plasma or flaming cutter Air duct on one side or both sides depending on the effective cutting area of the machine A blower and a suction outlet are fixed on a straight line together with t...

You like to know more?
Contact Us
A side suction system is for plasma or flaming cutter. Air duct on one side or both sides depending on the effective cutting area of the machine. A blower and a suction outlet are fixed on a straight line together with the cutter. While the cutter is working, the section underneath it in the work table within effective area will pull air into the duct. The duct is connected to an Welldone cartridge filter.

Air door system is modular-based that can be quickly customized based on your cutting area. Every section in the work table is independently controlled by valve and sensor to be synchronized to the cutter movement. Dust bins are also independent at each section for easy cleaning.

Steel tube cutting generates more dust comparing to other operations because of the think material, therefore directly capture of dust from cutter port is important. A suction hood is also recommended when there is extra dust.